DIAMOND FILES
DIAMOND FILES
Diamond grains are fixed by Ni-plating Process that enhance the density, sharpness, and abrasion resistance.
![DIAMOND FILES DIAMOND FILES](../img/info/product04/ph01.jpg)
Use
- Especially it's appilcable for the very high hardened materials modify,i.e. Ceramics, hard-Metals, hardened steel etc.,
- The slight attrition may achieve what you needs
- Please use it after dropping a little of oil on the working point.
S-TYPE(DIAMOND GRID NO. #200)
![S-TYPE(roughness of Diamond File #200) S-TYPE(roughness of Diamond File #200)](../img/info/product04/ph02.jpg)
Use
- It is also possible to correspond to the diamond grain degrees other than # 200
- It is smaller diamond file than K-TYPE.
- S-TYPE="Precision Needle" TYPE
K-TYPE(DIAMOND GRID NO. #150)
![K-TYPE(roughness of Diamond File #150) K-TYPE(roughness of Diamond File #150)](../img/info/product04/ph03.jpg)
Use
- It is possible to correspond to the electrodeposition length up to 50mm-100mm.
It is possible to correspond to the diamond grain degrees other than 150.
- It is larger diamond file than S-TYPE.
- K-TYPE="Die Sinker's "TYPE
SPECIAL DIAMOND FILES
![SPECIAL DIAMOND FILES SPECIAL DIAMOND FILES](../img/info/product04/ph04.jpg)
Use
- Various kinds of SHAPES, DIMENSION and DIAMOND GRID NUMBERS(#) are combined to polish the surfaces of the hardened Metals and Ceramics in works.
Furthermore, TSUBOSAN accept the customer's spaceial order with a will.
Roughness of Diamond File
- According to each difference of Grip Color, a worker can distinguish each roughness of Diamond File during his work.
Page Top
TAPERED FORM
Page Top
THIN HAND FORM
Page Top
5”DIAMOND FILES
![5”DIAMOND FILES 5”DIAMOND FILES](../img/info/product04/ph07.jpg)
Use
- Widthness and thickness compare with K-5 type, length(200mm) of FILE regarding to the handy convenience for a file working, it can be settled in a tool box easily.
- Cutting portion and the grip use all-in-one design,easy to use.
Page Top
HAND 200mm(#200,#600)
![HAND 200mm(#200,#600) HAND 200mm(#200,#600)](../img/info/product04/ph08.jpg)
Use
- ironworker・.flat 200mm diamond material is electro deposited.
- * Two kinds of diamond grain degree # 200 and # 600
- Other grain degrees are acceptable
Page Top
DIAMOND LAPPER
![DIAMOND LAPPER DIAMOND LAPPER](../img/info/product04/ph09.jpg)
Use
- Because it is a crank type, it is best for the projection parts such as ditches and rivets.
- Two kinds of diamond grain degree # 150 and # 200
- Other grain degrees are acceptable
Page Top
DIA FEATHER EDGE SAW-FILES
![DIA FEATHER EDGE SAW-FILES DIA FEATHER EDGE SAW-FILES](../img/info/product04/ph10.jpg)
Use
- Best use for grinding to saw edge,and It is the best for grinding of blade reproduction the glass, switching off,
the hardening steel, super-Cata metal, and ceramics, etc.
- It uses it to correct the buttress blade.diamond ectrodeposits formed and fabricated materials used on double-edged file.
Page Top
DIAMOND CRAFTSMAN
![DIAMOND CRAFTSMAN DIAMOND CRAFTSMAN](../img/info/product04/ph11.jpg)
Use
- Wire diameter with S-10 type and isomorphism are used for the Molding-Die works, especially pointed at the coner of the Molding-Dies.
- hand, half round, round, square, triangular, hook round, knife
Page Top
DIAMOND LINE-ROUND
![DIAMOND LINE-ROUND DIAMOND LINE-ROUND](../img/info/product04/ph12.jpg)
Use
- These Diamond Files like a needle have the diameter range of φ1.0mm-φ2.0mm in parallel(tapered to the top)with the bigger handle to use easily. To polish the bore hole.
Page Top
DIA ROUND CHAIN SAW-FILES
![DIA ROUND CHAIN SAW-FILES DIA ROUND CHAIN SAW-FILES](../img/info/product04/ph13.jpg)
Use
- DIAMOND ROUND CHAIN SAW FILES uses for set correction.
DIAMOND ROUND CHAIN SAW FILES are available to sharpen the teeth of chain-saw machine. speedy work and a long life.
Page Top
DIAMOND ROUND-TYPE
![DIAMOND ROUND-TYPE DIAMOND ROUND-TYPE](../img/info/product04/ph14.jpg)
Use
- It is the same thickness from the root to the point.
- φ1.2・φ1.5・φ2.0・φ2.5・φ3.0・φ3.5・φ4.0
Page Top
DIAMOND-BIT φ6.0(10 shapes)
![ROTARY FILES ROTARY FILES](../img/info/product04/ph15.jpg)
Use
- Ordinary steel file is applicable for the terrible circumstance and shape cutting operating.
Page Top
DIAMOND-BIT φ2.35 φ3.0(30 shapes)
![DIAMOND-BIT DIAMOND-BIT](../img/info/other/product07/ph02.jpg)
Use
- Compare to chrome plating and original nickel plating, the retention and rigid of the diamond surface are much more improved and enhance the resistance of the high-speed rotary strong performance.
Page Top