QUICK CUT FILES
- Conventionally, as the tip of the blade is processed by electrolytic polishing (PAT) and the sharp blade of the knife-like material is processed in advance, the concave part bosom is deep and suitable for the material that is easy to cause clog like stiffening plastic, bakelite, wood and other light metals.
QUICK CUT FILES ENGINEER'S TYPE
- This is a kind of big size. One Pcs is ok.
QUICK CUT FILES DIE SINKER'S ASSORTED TYPE
- 1 set 5 Pcs
- Attaches the small size grip to cause it easy to use
By TSUBOSAN original technology of the hard Coating, Bright-900 Series raised its fuction of steel files up to the supierior status which coild be used for the wide range between Soft-Metal and Hard-Metal.
Bright-900 Series resist against its own defacement, corrsion and clog.
Let the file material holds the coherency, the alone superficial coating technology, upgrade the hardness of the file,it is a “innovative” file.
- The file life would be expanded in 3-6 times longer than non-coating steel file.
(Differ according to the thing to be cut. )
- Can it excel in rust and corrosion resistance, and deterioration with the rusts of the humidity environment and the marine environment, etc.
- Cutting flour is particularly good,removal can be easily machined powder, a sharp cut sustained.
- Bright-900 Series (HRC67) giving the surface hardness, availed on wood, Plastic, Soft-Metal(AI.CU…), stainless steel, mold-Die Steel, Ceramic, Glass, etc..
BRIGHT-900 ENGINEER'S TYPE
- Min lot is a 1 set.
- Custom-made can be produced roughly and the shape, the size, and cutting.
BRIGHT-900 ASSORTED TYPE
CERAMICS COATING FILES
VC(Carbon Vanadium) is Permeated on the file surface.
- iron system metal, scorch insertion SC material, the marble, the glass, and the polish stone, etc.
- Mets with the cut powder such as brass and aluminum.
- Moist environmental, easide, and sea can be used.
- Surface hardness more than HRC65.
- It is excellent in wear and abrasion resistance and corrosion resistance.
- Durability is 5-10 times.
- Cutting powder leave quick.
SUPER SAW (VC)
- Please install in electric and the air pressure tool to be use.
- It is possible to correspond to the hand work by using an optional plastic steering wheel.
TIN SUPER HAND
SKH-51(JIS)HighSpeed Steel, high heat resisting and wear resistance
- 1 Rapid Durability improved rapidly (Endure at 3700 stroke per minute cutting speed when it is electric and air pressure tool. )
- 2 With use a manual steering handle.
- 3 Electric tool and air pressure tool.
HANDLE(FOR TIN SUPER HAND)
- Titanium super-hand, super-hand they are use for hand work.
With screw type cap φ5